J.R. Still
Powder Vision Inc.
P.O. Box 947
Preston, WA 98050
8110 304th Avenue SE
Preston, WA 98050
powdervision@msn.com
Phone: (425) 222-6363
HOURS:
Monday - Friday
7:00am - 5:00pm
Residential • Industrial
Applications
• Powder Coating
• Sandblasing Services
Powder Vision Inc.
About Us
So, what exactly is Powder Coating?
Powder Coating is an environmentally safe finish. There are no fumes, carcinogens or hazardous by-products associated with powder coating. The process provides a durable, long lasting decorative finish to products made of steel, aluminum, brass, and can be applied over galvanize. Today, powder coating offers a great color selection. There are literally hundreds of colors to choose from. You can visit the following websites for examples; www.cardinalpaint.com and www.tigercoatings.com.
The Application Process
First the parts are thoroughly cleaned. This is done by either media blasting, phosphate wash or both. Then the parts are placed on a cart where they are run through an oven to be dried off. Once the parts are dry, they are ready to be coated. This is done electro- statically. When the desired mil thickness is applied, the parts are put into an oven to be cured at a temperature of 400 degrees. The time of cure depends on the thickness and density of the parts. During the curing process the powder melts into the substrate of the part and crosslink’s onto itself. This creates the bond. Once the cure time is complete the parts are removed from the oven where they must be cooled off. Once cooled off the parts are 100% inspected and packaged for shipment.
Convenient Service
Powder Vision Inc. provides a reliable pick-up and delivery service for our commercial customers' convenience.
Quality Assurance
Powder Vision Inc. has a quality assurance department capable of understanding and complying to our customers requirements. We inspect 100% of all parts to assure that our customers are receiving a quality product.
Contact our office and let us show you what we can do!
J.R. Still
Powder Vision Inc.
P.O. Box 947 Preston, WA 98050 | 8110 304th Avenue SE Preston, WA 98050
Email: powdervision@msn.com | Phone: (425) 222-6363
Today, powder coating offers a great color selection. There are literally hundreds of colors to choose from. There are also different chemistries within powders to suit the end use. Powder produces a smooth finish, no runs, sags or heavy build-up.
A series of pretreatment steps are applied to the parts. An alkaline cleaner/iron phosphate solution followed by a clean water rinse. This applies an anti rust conversion coat to steel parts as well as helps the powder to adhere better.
The powder is applied by spraying charged particles of powder onto grounded parts. The parts are then cured in a controlled temperature oven. Once the parts come out of the oven they are fully cured.
Powder Coating & Sandblasting services in Seattle, Bellevue, Issaquah, Redmond, Renton, Kent, Auburn, Puyallup, Covington, Federal Way, Maple Valley, Fall City, Preston, Snoqualmie, North Bend, Newcastle, Sammamish, Woodinville, Kirkland, Tukwila, Mercer Island, Medina, Bothell, Kenmore, Lake Forest Park, Mountlake Terrace, Edmonds, Lynnwood, Carnation, Duvall & Monroe since 1997.